BMW 5 Series F10/F18 2011–2017 LED Headlights | DRL + Sequential Turn Signal

Transform the front-end presence of the BMW 5 Series F10/F18 with a complete LED headlight upgrade built around modern projector optics, bright white daytime-running-light signatures and amber sequential turn indication. The design gives the 2011–2017 generation a much newer visual identity while retaining the recognizable twin-projector BMW layout.

Premium Lighting Design

The assemblies combine a black molded housing, clear outer lens, multiple projector modules, integrated LED light guides and blue internal accent detailing. White daytime-running-light elements outline the projectors with a geometric signature, while the indicator changes to amber for a distinctive dynamic turn-signal effect. The enclosed assembly keeps the optics, decorative elements and lighting electronics precisely positioned as one complete unit.

Key Benefits

• Designed for BMW 5 Series F10/F18 2011–2017 styling and mounting architecture.
• Modern white LED DRL signature for a clean, high-end daytime appearance.
• Amber sequential turn-signal function.
• Projector-based headlight layout with deep black housings and blue internal accents.
• Full-assembly upgrade dramatically refreshes an aging front end without changing the vehicle bodywork.

Fitment Matters

BMW F10/F18 models were produced with different factory headlight systems, including halogen, xenon, adaptive and market-specific configurations. Compatibility can depend on original connectors, control modules and vehicle coding. Compare the original headlight type and rear connectors before purchase. Module transfer, coding or adaptation can be required depending on the starting configuration.

How to Replace the Headlights

1. Park on level ground, switch off the ignition and disconnect the battery according to BMW service guidance.
2. Remove the front trim and bumper components required to reach the headlight mounting bolts. Protect painted edges during removal.
3. Disconnect the original headlight harness and remove the factory assembly while supporting it to avoid damage.
4. Compare connectors and mounting points. Transfer any required factory control modules, ballasts or brackets according to the vehicle configuration.
5. Install the replacement assembly, reconnect wiring and refit the bumper/trim with even panel gaps.
6. Power up the system, verify low/high beam, DRL and indicators, scan for lighting faults and complete coding/adaptation if required.
7. Professionally aim the headlights to the correct local beam-height specification before night driving.

FAQ

Are these headlights for F10 and F18?

Yes, the design is intended for the BMW 5 Series F10/F18 generation. Exact electrical compatibility still depends on the vehicle's original headlight specification.

Do the turn signals illuminate amber?

Yes. The product design uses amber illumination for the dynamic turn-signal function and white illumination for the daytime-running-light signature.

Will coding be required?

That depends on the factory headlight system and vehicle electronics. Some cars can require module transfer, coding or diagnostic adaptation after installation.

Can I install them at home?

Headlight replacement involves bumper removal, electrical connections and final beam aiming. Experienced owners can perform the mechanical work, but professional installation and diagnostic verification are recommended.

Why replace the complete assembly instead of bulbs only?

This is a styling and optical-system upgrade, not simply a bulb replacement. It changes the housing, projectors, DRL geometry and turn-signal presentation together for a cohesive front-end redesign.