Universal Dual Electric Exhaust Cutout Valve Kit with Wireless Remote – 2.0 / 2.25 / 2.5 / 2.75 / 3.0 Inch

Remote-Controlled Dual Electric Exhaust Cutout System

Switch between a quieter routed exhaust path and a more direct open-exhaust path at the touch of a remote. This universal dual electric exhaust cutout kit combines stainless-steel Y-pipe sections, motorized butterfly valves, a control module, wiring harness and wireless remote into one complete system for custom performance exhaust builds.

Premium Materials & Construction

The exhaust sections are fabricated from corrosion-resistant stainless steel with TIG-welded joints for strength and heat durability. Each cutout uses an electrically driven butterfly valve housed directly in the exhaust branch. The motor assembly is mounted above the valve body and protected by a rigid metal bracket, while the control system uses a dedicated wiring harness and 12V power connection for cabin-operated switching.

How It Works

With the cutout closed, exhaust gas continues through the vehicle’s normal muffled route. Press the remote and the motor opens the butterfly valve, creating a shorter, less-restricted exhaust path through the cutout branch. This lets the driver change exhaust character on demand without physically removing any pipe sections.

Available Pipe Sizes

• 2.0 inch / 51 mm
• 2.25 inch / 57 mm
• 2.5 inch / 63 mm
• 2.75 inch / 70 mm
• 3.0 inch / 76 mm

What Is Included

The package includes the dual stainless exhaust cutout assembly, electric valve motors, control box, extended wiring harness, 12V power connection and wireless remote controller.

Installation Guide

1. Measure the outside diameter of the existing exhaust tubing and select the matching cutout size.
2. Choose an installation location with sufficient clearance from the floor pan, suspension, fuel lines and heat-sensitive components.
3. Cut the exhaust at the selected location and weld or professionally integrate the Y-pipe sections into the exhaust system.
4. Mount the electric valve motors where they are protected from direct impact and excessive water exposure.
5. Route the wiring away from the exhaust pipe, moving suspension parts and sharp edges.
6. Connect the control module and 12V power supply, then test remote opening and closing before finalizing the installation.
7. Check for exhaust leaks and verify that both valves move freely through their full travel.

Why Upgrade?

This system gives a performance car, custom build or enthusiast vehicle two exhaust personalities in one package. The normal exhaust route remains available for everyday driving, while the open-cutout mode delivers a more direct exhaust path and a noticeably more aggressive exhaust note.

FAQ

Is this vehicle-specific?
No. It is a universal exhaust component selected by exhaust-pipe diameter and available installation space.

Does the kit include two valves?
Yes. This is the dual-valve configuration with remote control.

How do I choose the correct size?
Measure the outside diameter of the exhaust tubing where the cutout will be installed and select the matching size.

Can the valves be opened from inside the car?
Yes. The included wireless remote operates the electric valve system through the control module.

Does installation require welding?
Professional exhaust fabrication is recommended for the cleanest, most secure installation.