Rolls-Royce Phantom 2007–2016 Front Lower Control Arm Bushing – OE 31120409267 Suspension Bush
Rolls-Royce Phantom 2007–2016 Front Lower Control Arm Bushing – OE 31120409267 Suspension Bush
Rolls-Royce Phantom 2007–2016 Front Lower Control Arm Bushing – OE 31120409267
Restore correct front-suspension isolation and control with a replacement lower control arm bushing built around OE reference 31120409267. The large metal outer sleeve and high-density rubber core are designed to absorb road shock, control suspension movement and reduce unwanted vibration through the chassis.
Fitment
- Rolls-Royce Phantom 2007–2016
- Front suspension lower control arm / bent arm bushing application
- OE reference: 31120409267
Construction
- Heavy-duty steel outer sleeve
- High-density rubber vibration-isolating core
- Precision-molded center mounting section
- Designed for press-fit installation into the control arm
Installation
Remove the affected control arm according to the vehicle workshop procedure, press out the original worn bushing and clean the arm bore thoroughly. Align the replacement bushing in the same orientation as the original component and press it in using the correct support tooling. Reinstall the arm and complete final fastener tightening at normal ride height where required by the suspension procedure.
FAQ
What OE number does this replace?
The primary reference is 31120409267.
Which vehicle does it fit?
It is designed for 2007–2016 Rolls-Royce Phantom front suspension applications using this bushing.
Is this a complete control arm?
No. This listing is for the replacement bushing shown in the product images.
Does installation require a press?
Yes. The bushing is installed into the control arm using suitable workshop pressing equipment.
Should wheel alignment be checked afterward?
Yes. Suspension work can affect geometry, so alignment should be checked after installation.