Bentley Flying Spur & Continental GT Active Engine Mount Pair | 3SA199383A / 3SA199384A

Restore refined drivetrain isolation with a vehicle-specific active engine mount pair for Bentley Flying Spur and Continental GT applications using part numbers 3SA199383A and 3SA199384A. This matched left-and-right replacement set is designed for owners and workshops addressing worn engine mounts, excessive engine movement, vibration at idle or harshness transmitted into the cabin.

Premium Construction & Purpose

Each mount combines a substantial cast-metal mounting structure with an elastomeric isolation section and integrated active-control electrical hardware. The rigid metal body supports engine load and preserves mounting geometry, while the compliant isolation element helps absorb engine vibration before it reaches the chassis. The integrated electrical connection allows the mount system to work with the vehicle's active mounting strategy where equipped.

The result is the kind of component that matters far beyond simply holding the engine in place: a healthy mount system helps maintain drivetrain alignment, controls powertrain movement during acceleration and deceleration, and contributes to the quiet, composed character expected from a Bentley.

Key Benefits

• Matched pair covering replacement references 3SA199383A and 3SA199384A.
• Designed for Bentley Flying Spur and Continental GT applications that use these exact references.
• Helps reduce vibration, thump and excessive engine movement caused by worn mounts.
• Robust cast-metal structure with vibration-isolating elastomer and electrical connection hardware.
• Excellent value for a high-cost luxury-vehicle repair when compared with dealer-channel component pricing.

Fitment & Ordering

Order by part number first. Confirm that the original mount references on the vehicle match 3SA199383A / 3SA199384A before purchase. Bentley model year, engine and regional specification can change mount configuration, so VIN and original-part-number verification is the best way to avoid fitment errors.

How to Replace the Engine Mounts

1. Park the vehicle on level ground, allow the powertrain to cool and disconnect the battery according to the vehicle service procedure.
2. Raise and support the vehicle safely. The engine must be supported with suitable professional lifting/support equipment at approved support points before a mount is loosened.
3. Remove the access components required by the workshop procedure, then disconnect the electrical connector from the mount.
4. With engine weight safely supported, remove the mount fasteners and the old mount. Compare mounting points, connector position and part number with the replacement before installation.
5. Install the new mount without forcing the bracket or connector. Tighten all fasteners to the vehicle manufacturer's specified sequence and torque values.
6. Reconnect electrical connections, restore removed components, lower the vehicle and carry out a fault-code scan and functional check.

Installation note: active engine mounts are load-bearing powertrain components. Professional installation with the correct support equipment and model-specific torque data is strongly recommended.

FAQ

What do worn engine mounts feel like?

Common symptoms include stronger vibration at idle, a knock or thump when selecting drive or accelerating, excessive engine movement and increased harshness in the cabin.

Are both sides included?

Yes. This listing is configured as a matched pair corresponding to references 3SA199383A and 3SA199384A.

Why replace both mounts together?

Both mounts operate as a system and experience similar age, heat and load cycles. Replacing the pair helps restore balanced engine support and avoids leaving one heavily worn component beside a new one.

Will this fix every vibration problem?

It addresses vibration caused by degraded engine mounts. Ignition, fueling, drivetrain, wheel or suspension faults can create similar symptoms and should be diagnosed separately.

How do I confirm compatibility?

Match the OE reference numbers and vehicle VIN before ordering. If your original references differ, select the listing that matches the vehicle's installed parts.